Install SATO WS408DT

This printer must be installed with Seagull drivers.
Default drivers from Sato don’t work with Medialog.

1. download the Seagull driver install program

(current name : SATO_2020.1.exe)
https://www.seagullscientific.com/support/downloads/drivers/sato/

1. Doubleclick and change path to ‘desktop’ (or c:/apps_inst)

A location that you can easily can find back

1. Uncheck both checkboxes

Meaning : DO NOT run the Driver wizard after unpacking drivers !!!

1. Assign the Seagull driver

If the SATO printer is already installed with the original drivers then you have to change the driver. (start from step 4a)

If the SATO printer is not installed (unspecified) :
Add printer - select ‘The printer that I want isn’t listed’

Step 4a is only for those who already have the SATO printer with the original drivers installed.

(4a. in properties - go to Advanced - click on New Driver )

1. Select the directory where the program was installed. (click on Have Disk)

1. Select SATO.inf

Next you simply answer some possible following questions and you will see that  the printer has been added

1. You can double check by opening the properties and there you should see

BarTender as driver.

1. Last step is the configuration in Mediaconfig

In configurationpage click on tab ‘Stickeren’
Click button ‘Printer’ and select the SATO WS408DT printer

Click on Tab ‘Termijn verkoop’
sub-Tab ‘Klantenbestellingen’
Click button ‘Printer’ and selct the SATO WS408DT printer

Finally click on the ‘OK’ button to save the modifications.
Close the window and ‘restart’ Medialog.

That’s it.

Related articles